Interface and NAT Configuration To configure the allowed networks and NAT traversal on an interface, use the following commands: set vpn ipsec ipsec-interfaces interface eth0 set vpn ipsec nat-networks allowed-network 10.0.0.0/8 set vpn ipsec nat-networks...
Internet Protocol version 6 (IPv6) was designed by the Internet Engineering Task Force (the IETF) to expand the amount of IP addresses available. IPv6 addresses are 128-bit addresses, expressed in hexadecimal notation (for example, 2001:DB8:8::260:97ff:fe40:efab)....
